Content
Colour
transparent
Allbond-Fluid
Article Nr. 261 10EN
Content
Colour
transparent
Reaction adhesive cyanoacrylate glue
High quality single component reaction adhesive cyanoacrylate glue, transparent, with Close & Clean closure, clean work, 20 g und 50 g in gel form, 10 g in low viscosity form.
Benefits of use:
Strong bonding after seconds, easy handling, good material compatibility, safety in use, adhesion in seconds, bonds a wide variety of materials, does not run or drip, practical screw cap, usable up to 12 months after opening, very easy to dose, extremely high adhesion strength, permanently transparent, no „flooding“ of absorbent surfaces.
Areas of application:
For installation and repair, suitable for indoor and outdoor use, bonds wood, MDF, leather, paper, rubber, cork, metal, aluminum, hard foam, plastics, plastic edges, ceramics, tiles, etc.
Technical data
| Basis | Ethyl cyanoacrylate |
|---|---|
| Density | approx. 1,05 g/cm³ |
| Full Strength | after 24 hours |
| Smell | characteristic |
| Storage life | 12 months |
| Strength to handle | after 1 to 20 seconds (depending on material) |
| Skin formation time | approx. 1 to 2 minutes |
| Storage | at +5° C to +14° C |
| Temperature | resistant from -30° C up to +150° C |
| Viscosity | low viscosity (from 80 - 120 mPas at +25° C) |
| Tensile strength | > 18 N/mm² (for sandblasted steel) |
Other sizes
20
g
261 20EN
50
g
261 50EN