Allcon 10 Construction adhesive
Tested according to WATT 91 DIN EN 204 D4, GEV-EMICODE® EC 1Plus – very low emission, bonds nearly all materials, single component, easy handling, solvent-free, resistant to weather and aging, resistant to many chemicals, frost-proof, usable with natural stone.
Benefits of use:
Use with standard caulking gun, can be put under stress after just 7 to 10 minutes, no primer required, replaces multiple other adhesives and glues, safe to use, always the right product to hand, opened cartridge can be used up to 10 months; unopened cartridge lasts up to 18 months, minimum wastage, can be painted and varnished, suitable for indoor and outdoor use.
Areas of application:
Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much more.
Technical data
| Curing | approx. 3 mm Allcon 10 per 24 hours; approx. 70% surface bonding after 7 to 10 minutes; 100% cured after 30 to 45 minutes |
|---|---|
| Basis | Moisture-curing polyurethane |
| Density | approx. 1,4 g/cm³ |
| Tested | test report in accordance with DIN EN 204 D4 (waterproof gluing), according to WATT 91 (+80° C (+176° F)) |
| Smell | low odour |
| Storage life | opened cartridge can be used for up to 10 months, unopened cartridge lasts for up to 1½ years |
| Skin formation time | approx. 3 minutes under standard conditions (+23° C/50% relative air humidity) |
| Storage | dry, at room temperature |
| Gap bridging | approx. 1,0 cm |
| Temperature | resistant from -40° C to max. +80° C (short term: +120° C) |
| Processable | from +5° C to max. +40° C |
| Viscosity | pasty |